How to use your buggy

Your mountain buggy™ is so easy to use with features such as the two-step fold, foot operated brake and adjustable handlebar. Its design is ultra modular adaptable so you can attach the carrycot or infant car seat directly to the buggies frame.

Folding your buggy

It’s quick and easy to fold your buggy.

Adjustable seat positions

Easy to convert your buggy from lie flat for newborns to upright for toddlers.

Converting from buggy to a pram

With a simple click attachment system it's easy to convert buggy to a pram with the buggies custom fit carrycots.

Directly attach your car seat to buggy frame

Easily move between car and buggy with our range of travel systems.

Transporting your buggy

A special locking strap is located on the cross brace bar, or for the swift on the handlebar. Wrap this strap around the axle and then clip fasteners together to secure buggy stays closed when folded.

Adjustable handlebar

Adjust the height of the handlebar by pressing both buttons on either side of the handlebar and click into a position that is comfortable for you.

How to care for your buggy

Our buggies have been engineered tough and designed to handle all terrain. To keep your buggy working effectively and safely for years to come, follow these simple care tips.

Brake

The brake should be lubricated regularly to maintain optimum operation. It may require extra lubrication if the brake is stiff to operate.

Cleaning

The fabric should be cleaned regularly. Brush off any excess dirt or sand and rinse with lukewarm water. Fabric can be removed and washed by hand using a mild natural soap solution in lukewarm water (no more than 38°C/100°F). Rinse thoroughly. DO NOT tumble dry or dry in strong sunlight.

To avoid fabric fading, cover the buggy if it is exposed to direct sunlight e.g. in a car or if stored in exposed areas.

If the buggy is exposed to salt water, salt spray or beach sand, wash any steel parts of the buggy by using warm soapy water, then dry thoroughly and protect by spraying with light aerosol can oil, e.g. WD40® or CRC®.

Handlebar grip

Take care to protect the handlebar grip from abrasion or sharp objects. Damage to the foam grip happens with normal wear and tear. It is not covered by your warranty but we can replace it for you at your cost. There are two ways to replace the foam grip.

Order a replacement handlebar grip from your local retailer stating which buggy you have.

Visit your local retailer to have the handlebar grip replaced for you.

Storage

Store buggy inside in a dry place but away from central heating units/radiators and do not store in airing or hotwater cupboards. Fabric may develop mould or mildew if stored in humid or damp conditions.

All buggies produced since 2006 feature a fold lock, which stops the buggy from unfolding.

Tyres

We recommend that you use our tyre pump to maintain pressure. This can be purchased from your local retailer.

The correct tyre pressure maximum is 20psi, (140KPa). Do not exceed 30psi (210KPa). At this pressure you should still be able to indent the tyre with your thumb. Over inflated tyres can cause the rim to buckle and the tyre may explode.

Tyre tubes

If a puncture occurs the inner tube can be repaired with a bicycle repair kit, or replaced. If tread becomes worn the tyre should be replaced. Contact your local retailer, or most cycle stores have tubes and repair kits.

How to use our tyre pump

To use our tyre pump, remove the connection hose and attach relevant ends to top of pump and wheel valve. Do not overtighten. Ensure there is no tension on the connection hose while inflating tyre.

Wheels

New bearings, tyres, inner tubes and rims are available to purchase as a complete set from your retailer. The front and rear wheels use different sized bearings. When ordering new parts please state that you need front or rear wheel parts.

Find a part for your mountain buggy™

Our buggies are engineered tough to handle the demands of all terrain.
In the event you need to have a part or component fixed or replaced, either contact your local retailer or distributor or buy directly from our spare parts online store.

Safety Standards

Safety standards are taken seriously at mountain buggy™ so you can live life without limit. Your baby’s safety is our top priority, we rigorously test all our buggies and accessories to exceed some of the toughest global safety standards.

• Australia/New Zealand Standard AS/NZS 2088:2000
• European Standard EN 1888:2005
• USA Standard ASTM F833-08
• Canadian Standard SOR/85 379

Our carrycots conform to:

• EN 1466:2004
• ASTM F2194-2007a

And when used with our mountain buggies conforms to EN 1888:2005, ASTM F833-08, SOR/85 379, AS/NZS 2088:2000.

Frequently asked questions

1. Are the new 2010 carrycots compatible with my older style mountain buggy™?
2. Can I use the swift carrycot on the duo buggy?
3. Are the travel systems compatible with my mountain buggy™?
4. What carseat models are compatible with the universal travel system
5. How do I get my mountain buggy™ repaired?

1). Are the new carrycots compatible with my older style mountain buggy™?

2). Can I use the swift carrycot on the duo?
No the swift carrycot has different attachment systems so can’t be used on the duo buggy. The swift has 2 snap locks either side of the carrycot that clip to the buggy frame whereas the duo single carrycot has 2 snap locks on one side and a sliding plate on the other to attach to the centre bar.

3). Which travel system is compatible with my mountain buggy™?
Use the table below to work out which travel system is compatible with your buggy.

NOTE: from 2010 onwards we have a range of new travel systems coming out to fit the following carseats:
Britax™
Phil&teds bebe™
Maxicosi Cabrio Fix™
Maxicosi Mico™
Chicco Keyfit 30™

4). What carseat models are compatible with the universal travel system
Baby trend™ – Latchlock™ &  Flexlock™
Bertini™ – Manhattan™
Century™ – Plunket™
Evenflo™ – Discovery™ & SecureRide™
Safe-n-Sound™ - Rock-a-Tot™
Graco™ – SnugRide™ & SafeSeat™
Peg Perago™ - Primo Viaggio™
Maxicosi™ – Cabrio™ & City™

5). How do I get my mountain buggy™ repaired?

Depending on the nature of the repair needed, there could be several options available. To purchase a spare part click here, otherwise please contact your local mountain buggy™ retailer who will be able to advise an appropriate course of action.

Have a question we haven’t answered, then email your question here.